5kw wind generator, Electronic Yaw

5kw wind generator, electronic yaw Low start wind speed Low noise High efficiency Generator warranty: 3 years

Vertical wind mill generator, Vertical wind generator, Vertical wind power,

Vertical wind mill generator, Vertical wind driven generator, aerogenerator

Vertical wind turbine , Vertical wind generator set , Vertical wind power , Vertical wind turbine generator , Vertical wind products , Vertical wind power generator , Vertical windmill, Vertical wind mill, Vertical wind and solar hybrid system, generator, ship wind generator.

 

Ø         Horizontal axis and Vertical axis

Ø         Power from 300w to 30kw

Ø         Large power, low volume, high efficiency

Ø         Carbon fiber blades, high efficiency of anti-wind ability, move mutely and steadily!

Ø         Blades with the ability of automatically stall protection under strong wind

Ø         Weather proof industrial strength design

Ø         Designed to perform in low wind speeds with low noise aerodynamic carbon fiber blades!

Ø         Coated Aluminum alloy construction

Ø         Built-in overspeed protection

Ø         The crust is adopted alloy steel, microdiecast, the surface is used the art of electrostatic painting to make the product in good weather resistance to prevent rust.

Ø         The work pieces of the appliance are made from stainless steel material.

Ø         The blade is adopted super strengthened complex material or engineering plastics.

Ø         The slip ring is used the construction, high temperature lines, whose stability is unique and the output lines of the wind turbine will never be intertwined.

Ø         The heat removal system is distinct, the tail adjusts the direction accurately and has the design of keeping steady.

Ø         Electric appliances such as lighting, TV, radio, and fans also suits camping and boats and marine life etc.

 

5KW Wind Generators Spec:

Generator
Rated power	5000W
Maximum output power	7500W
Blade quantity	3 PCS
Rotor blade diameter	6.4m
Start-up wind speed	3.0m/s (6.7mph)
Rated wind speed	10m/s (22mph)
Rated rotating speed	200rpm
The weight of generator	77kg
Charging voltage	216V DC

Blades Fiberglass reinforced plastic material, with the advantages of: 1)      low material cost, light weight and low start torque 2)      quantity production with mold, low cost 3)      good fatigue resistance and shaking resistance, reach 20 years’ life 4)      good resistance of corrosion from acid, alkali and steam, as well as rough weather
Material	FRP
Diameter of wind wheel	6.4m
Rated rotating speed	200rpm
Rated wind speed	10 m/s (22mph)
Start up wind speed	3 m/s (6.7mph)
Net weight	63kg

Controller
Apparent power	5KW
Charging voltage	216V DC
Efficiency	≥95%
Breaker	DC_input >= 25A
Environment temperature	-10°C~+45°C
Temp compensation	YES
Battery reversal protection	YES
Load short circuit protection	YES
shell	Aluminum
Wind generator protection	Manual/automatic
Accident-oriented security	YES
Battery offline  protection	YES
Cooling	Force air cooling

Inverter
Apparent power	5KW
Charging voltage	216VDC
Rated inverter output voltage	Single-phase  AC220V/110V±10%
Frequency	50HZ±1% / 60HZ±1%
Wave type	sine wave

Wind Generators Install:

The maintenance of the wind generator

The products are divided into two kinds: common product and high quality product (no maintenance), the common product need following maintenances regularly.

Check, clean and lubricate all rotating parts once per year.

Before rainy season, clean outside and paint antirust grease on the surface of all fixed connecting parts once a year.

Lubricate and maintain bearing of generator once per operating year.

Clean, remove rust and paint all exposed parts once every two years.

The maintenance of high quality product (AA)

a. Exposed parts are made of stainless steel and  have been treated by special  long time effective rust-protection  treatment, so the outside of those parts don’t need maintenance.

b. The generator has adopted high grade bearings and high grade lithium grease, the bearings need to be checked after operating for 5 years, if it is necessary, add some grease to the bearings.